I’ve been busy in the workshop with whirligig parts for eBay and also organizing the many tools and wood inventory I’ve accumulated over the years. The limited space requires rearranging half the shop to make an area to work with each individual tool. I will give the workshop a complete overhaul one of these days, but to make room I need unleash my inner artist on some of the beautiful wood specimens I’ve personally collected from Mother Nature.
This particularly spectacular specimen I found in my stash while preparing for the Newark Maker Faire. With this branch I created an exhibit illustrating various ways wood is milled. My plan was to use the wood for kindling after the faire because planing such tiny pieces of wood is generally not worthwhile. The beautiful grain and imperfections charmed their way from the flames and into the workshop. One of the big problems with working with small pieces of lumber is figuring out what to build with it.
I allowed the wood to dictate the direction without taxing my brain exploring potential projects. After planing each board to an equal thickness I placed the boards on the bench exploring various combinations. I started joining pieces together without a specific destination in mind. I’ve titled the result of this process “hashtag coasters”. The four coasters can be arranged in various artful ways or used for beverages when the situation arises.
A storm fallen tree branch has culminated several years later as this piece of art representing hours of thoughtful work of hand and mind.